Koreidi/Sanci - Spool Ring Enlargement AMS Accessory
Print Profile(1)
Description
The Koreidi spool ring enlargement accessory has a very tight fit with no protrusions. It transforms into a standard 200MM filament spool size, making the AMS run smoother.
Note that PETG material must undergo one material shrinkage calibration before it can be precisely inserted.
Koreidi spools may have inconsistent left and right edge diameters. One side may be a bit loose, but actual testing shows it does not affect use.
Note that for AMS Gen 1, it must be placed entirely to the left. For AMS Gen 2, it must be placed in the 1 right 2 left 3 right 4 left positions, otherwise it may cause filament jams.
Sanci spools have also been tested to work, with a tight fit. However, the Z-axis thickness might need slight scaling to be thicker.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)