Evoker - Free 3D Print Model

Search models, users, collections, and posts

ruimach

Props & Cosplays>Cosplay Weapons

IP Report

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

A1 mini

0.2mm layer, 2 walls, 10% infill

Designer

6 h

3 plates

4.9(32)

For Mini - 0.2mm layer, 2 walls, 10% infill

Designer

5.6 h

4 plates

5.0(5)

Open in Bambu Studio

Boost

267

675

668

426

Released

Description

Inspired by the famous Persona game and made at the request of my kid. At least I know this one is safe ;)

Requires supports and glue.

Scale adjustment according to hand size. For me, a scale of 130% worked well.

Update 12/05/2024:

Added files for small printers, like the mini: Barrel prints in two parts, but requires a bit of glue.

evoker

persona

Comment & Rating (51)

@CTSazabi

Print Profile

0.2mm layer, 2 walls, 10% infill

Infill was showing through walls so I changed the infill to lines and the overlap percentage to 8%.

@Bruh_

Boosted

Hi could you make one for the a1 mini please. Id highly appreciate it

The designer has replied

@ruimach

Hi @Bruh_ ! I made a version that is possible to print in a 180mm printer, I split the barrel in two. You will only need a bit of glue to stick the two parts together. Let me know if it worked well for you.

@Bruh_

Boosted

Replying to @ruimach :

Thank you

@Bruh_

Boosted

Replying to @ruimach :

i printed it it turned out amazing thank you so much. Is it possible for you to make a stand for it if you dont mind ofc!

@Ickur_Bob

Print Profile

0.2mm layer, 2 walls, 10% infill

Thank you for the print model!!! came out great 👍

@user_699442792

Boosted

top notch print! very smooth and once painted turned out amazing!

@user_686255398

Boosted

came out perfect. thank you!

@JoseLopez

Boosted

Print Profile

0.2mm layer, 2 walls, 10% infill

10/10 diseño muy chulo, se imprime fácilmente y las piezas encajan perfectamente sin tener que meter ningún parametro

@Legomichael

Print Profile

For Mini - 0.2mm layer, 2 walls, 10% infill

one of the first thing I print and it came out great! came out a little darker than it should because I didn't have that shade of gray

@user_1033276217

Print Profile

0.2mm layer, 2 walls, 10% infill

@ToastyToast18

Boosted

Print Profile

0.2mm layer, 2 walls, 10% infill

While I elected to print in one color and airbrush paint on after, I think it turned out really well. The model is nice, no complaints on that end. I have larger hands so I had to scale it to 140% instead of the default 130%, but I definitely plan on putting this up on my wall next to my P3R vinyl!