Tesla Tissue Box Holder: Redesign + Sizes

I liked the basis of the other models for this but was not happy with how loose they fit and thought I could make the tolerances tighter and improve aesthetics slightly.

I printed it in PLA for the time being, and it does the job. However, it would definitely be smarter to print in something stronger for the long term.

Based on what I found online it appears rectangular tissue boxes come in two standard sizes with differing widths (4.5" & 4.75"). So if you want a perfect fit, taking a quick measurement of your specific tissue box's width is required. Otherwise you can pick the largest size below and it should fit most boxes. There are three sizes available, based on the two standard sizes (medium and large) and the non-standard boxes I use (size small).

Dimensions are as follows:

Small (S): 110mm/4.33" width (Bonterra brand tissues)

Medium (M): 115mm/4.5" width

Large (L): 120mm/4.75" width

*All retain the same 230mm/9" length

*Tested to work with most Tesla Model Y's and Model 3's

*Does not work with the Tesla Model Y Juniper