Universal Leaf Blower Gutter Attachment - Free 3D Print Model

Search models, users, collections, and posts

MoistDischarge

Tools>Other Tools

IP Report

Print Profile(17)

All

P1S

X2D

X1 Carbon

P1P

H2D Pro

P2S

X1E

H2C

H2S

H2D

A2L

45mm Left - 0.2mm layer, 3 walls, 20% infill

Designer

4 h

1 plate

5.0(1)

45mm Right - 0.2mm layer, 3 walls, 20% infill

Designer

4 h

1 plate

70mm Left - 0.2mm layer, 3 walls, 20% infill

Designer

5.7 h

1 plate

5.0(3)

70mm Right - 0.2mm layer, 3 walls, 20% infill

Designer

5.8 h

1 plate

Click to see more

Open in Bambu Studio

Boost

731

2696

661

348

Released

Description

This is a universal leaf blower attachment that you can slide on the end of your stock leaf blower, used for blowing out your gutters.

There are multiple sizes, with left and right configurations for both sizes. Measure your leaf blower end no matter what brand you have and select the right size for you. The leaf blower end outside diameter should be ~1mm smaller than the size printed so it slips over the top.

Reported models with sizes:
45mm - Small Dewault
70mm - Stihl

75mm
81mm - HeinPro
85mm 220 printer volume - Milwaukee #2, EGo 615CFM
86mm - Milwaukee - The as-shown model *Note this does fit rather deep*
87mm - EGO
90mm - Menards Master Force
96mm - Toro

leaf blower

leaf blower attachment

Comment & Rating (75)

@ProGolferChubbs

Boosted

The print profile is no longer public

printed great. ladder and leaves time now!

The profile uploader has replied

@MoistDischarge

Looks great! Good luck!

@stickylayers

don’t forget goggles lol

(Edited)

@duster_office

Boosted

Thanks for customizing it for me and others with a Toro. It printed really well and the support came off cleanly with Bambu PETG basic.

The designer has replied

@MoistDischarge

Happy to help and glad it worked for you! Also, thanks for the boost!

@ajanetski

hi there, would love one for my fiancés dewalt blower please … not sure if u need the inside or outside measurement so I sent u pic of it with a ruler hehehe 🤞

The designer has replied

@MoistDischarge

I uploaded a 45mm version which should fit easily over that (maybe a little loose, but you could shim that with tape if necessary). You will also want to probably tape the duct on. Most other versions have a taper and you can press fit them on, but the shown uses a twist lock connection. It would take lots of measurements and modeling to make that work as OEM. But taping it on is quick and simple. Finally, in all the profiles I have removed the support in the neck region because the geometry made it possible to be printed without it and that support tower is quite a lot of material. This narrow version might be pushing the limit though and you may see layer drooping.

@ajanetski

Replying to @MoistDischarge :

oh these are designed to attach to a tapered attachment? he pulled off the attachment for the photo

@MoistDischarge

Replying to @ajanetski :

Correct. Hopefully the 45 still works with that taper! You could scale it slightly as well to make it fit.

@Aiden_3D

Print Profile

85mm Right - 220mm volume - 0.2mm layer, 3 walls, 20% infill

Works great. I printed the 85mm for my WORX Leaf blower. I had to do a little modifications on the end of the blower. There was a piece I had to file down to make it fit now I just need to print the opposite side.

The profile uploader has replied

@MoistDischarge

Glad it worked for you and thanks for letting us know what size for what blower! For what it's worth, I only did one side. Blew everything one direction and then just hand scooped out whatever accumulated on the end.

@user_1695120603

Print Profile

86mm Right - 0.2mm layer, 3 walls, 20% infill

Love this model. Printed nicely. used it as soon as I got it off the plate. worked perfectly. Thanks for the easy solution to a mundane, yet important problem.

@Hankcam

I wasn't 100% sure with my tapered blower so I drew my own. 100% ripoff of yours so it counts as a print! Has some issues on my end with using support inside the arch, not sure my printer would have made it without them but they were a pain to get off!

@Hankcam

Trying to download the stls and yeah, the files just have both exhaust vents...

The designer has replied

@MoistDischarge

Download the 3mf file. Some have both versions (left and right), but one version is suppressed in the plate. When you click slice plate, only one of them will be sliced. I removed any STLs for clarity.

@Hankcam

Replying to @MoistDischarge :

Cura is unable to open ups 3mf files from here. I've only ever got stls to work

@Hankcam

Replying to @MoistDischarge :

I think I just found an STL that works! Also, for clarity, have people make their own right vs left, they can just mirror it :)

@user_2666951636

can we get a version that is in three pieces for smaller printers please

The designer has replied

@MoistDischarge

Which size and A1 mini?

(Edited)

@user_2666951636

Replying to @MoistDischarge :

86mm and yes that will work. i use a ad5x witch is 220x220x22o so you original is just a bit too tall thank you so much

@MoistDischarge

Replying to @user_2666951636 :

I added an 85mm (instead of 86mm based on feedback) and made it small enough for a 220mm volume without splitting it up. Saves you the effort of having to glue them together. You should be able to use one of the "85mm Left/Right - 220mm volume" profiles.

(Edited)

@ProGolferChubbs

Boosted

hey! was looking exactly for this model, thanks so much for sharing.. the 2 profiles you added for the 86mm seem to both have a left and right exhaust path. is that supposed to be like that? also, if I can, ask for a 87mm ID option to fit the EGO brand of electric blowers, that would be awesome!

The designer has replied

@MoistDischarge

I had both model configurations in the same file, then suppressed one version, then saved the 3mf. When you click "slice plate" only one will be sliced. I should be able to add a 87mm version this weekend. *Added*

(Edited)

@MoistDischarge

Replying to @MoistDischarge :

@ProGolferChubbs 87mm ID version is uploaded

@ProGolferChubbs

Boosted

Replying to @MoistDischarge :

many thanks Rockstar

@user_14585032

85mm fits the EGo 615CFM like a glove.

The designer has replied

@MoistDischarge

Thanks for sharing the model it worked on!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.