ice fishing tent accessories
Print Profile(2)
Description
these are 3d printed versions of the Eskimo e hub attachments, allowing you to customize and make friends jealous of your tent. You simply just take the nut off the hub of your tent put the mounting piece on the bolt then screw the nut back on and just like that you are ready to go, ounce it is bolted on you don't need to remove them when packing up.
New!!- 2025-12-17 just added a triple splitter
Table- if you print the table with multiple parts then you will have to glue the phone holder, cup holder, and tray on from the bottom (super glue is suggested for a strong hold) the mounting clip is screwed on with 2 m3 screws.
Rattle reel- the actual rattle reel part you put about 10 small metal bb's in the bottom part then glue the top plate on. The mounting clip is screwed on with 2 m3 screws.
Rod holder- First you will want to place a m3 nut in the holes on the rod holder piece and knob (the nut that goes in the knob should be quite tight might need pliers) then glue the locking pieces onto the rod holder piece and the mounting clip make sure to alight the holes. then use a m3 bolt to clamp the two pieces together
Cup holder- just screw the mounting clamp to the plate on cup holder with 2 m3 screws
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (31)