C-Clip.di4.9 D-SUB SUB-D

PLA clips for easier screwing of DSUB connectors
These are clips to put on the screws of DSUB (or SUB-D) connectors.
You slide the clip on about halfway up and make sure both slots of the screw are blocked.
Then you have a guide when screwing in, so that the risk of the screwdriver slipping sideways is reduced.
The clips are intended for single use. With repeated use, they can break or the
clamping force decreases.
Inner diameter approx. 4.9 mm. Outer diameter approx. 7 mm, height approx. 5 mm.
It is intended for DSUB housing screws with approx. 5 mm grip diameter (see photos).