Vevor diesel heater RZR mount kit

Installed onto a 2015 RZR XP 1000

this kit has feet to raise the heater off the floor to make room the the exhaust, I drilled 8 holes on the access panel that sits in the back of the box to bolt down to so the whole thing can be removed to do a service, added a plug to the heater so it can be unplugged to be removed. I used ¼ x 20 bolts of different lengths for the mounting feet

the GoPro bar mount I got off of thingiverse https://www.thingiverse.com/thing:2752125 I had to make some physical modifications to the hand screw knob after printing to fit the hardware I had on hand

I then made a bracket to go from the GoPro mount to the heater to brace the top of the heater as it wobbles a bit when driving when just bolted from the bottom. this part uses m4 bolts and nuts

these 3d printed parts make my diesel heater install look super clean so Im posting it for others that have the same heater and side-by-side that want to use this instead of blocks of wood as feet