Ernesto

Consigliato Noozle 0.2

cover

04.jpg

01.jpg

03.jpg

05.jpg

piatto 1 con pausa livello 22

plate_1.png

piatto 2 - usare colore grigio

plate_2.png

2025-11-22_2ad459684da9d.jpg

0.2mm nozzle, 0.08mm layer, 4 walls, 15% infill

SOLO PIATTO PORTA TARGA,STAMPARE CON FILAMENTO GRIGIO PER RENDERE REALISTICO IL PORTA TARGA0.08mm layer, 2 walls, 100% infillConsiglio di usare Nozzle 0.2

LICENSE PLATE HOLDER ONLYPRINT WITH GRAY FILAMENT TO MAKE THE LICENSE PLATE HOLDER REALISTIC0.08mm layer, 2 walls, 100% infillRecommended to use 0.2 nozzle

SOLO PIATTO PORTA TARGA 0.08mm layer, 2 walls, 100% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

FMS SUZUKI JIMNY Lj10Ho creato queste targhe per rendere questo modello ancora più realistico. Nel primo piatto targa anteriore e posteriore, è stato pensato per chi come me non ha AMS, dovendo venire bicolore si parte con il filamento nero, al livello 22 ho inserito una pausa, in questo modo durante la stampa potete cambiare il filamento, inserire quello bianco e riprendere la stampa, il risultato lo vedete dalle foto.Poi stampate il porta targa posteriore dal piatto 2, consiglio pla silk+ 13108 titan grey.Consiglio vivamente di usare nozzle 0.2 per una precisione di stampa accurata sui numeri.<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Incentivate il mio lavoro per tanti altri progetti e per tutti coloro che amano il  moddellismo rc auto. Grazie.</boostcontent></boostme>

FMS SUZUKI JIMNY Lj10I created these license plates to make this model even more realistic. In the first front and rear license plate, it was designed for those who, like me, do not have AMS. Since it needs to be two-color, you start with the black filament. At layer 22, I inserted a pause, so during printing you can change the filament, insert the white one, and resume printing. You can see the result from the photos.Then print the rear license plate holder from plate 2. I recommend PLA Silk+ 13108 Titan Grey.I strongly recommend using a nozzle 0.2 for accurate print precision on the numbers.<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Boost my work for many other projects and for all those who love RC car modeling. Thank you.</boostcontent></boostme>

Print Profile(2)

Bill of Materials

Description

Comment & Rating (1)

License