Loud Klicker - Fidget Toy - Snap & Klick & Push

🇩🇪 Quick Info

A handy, support-free fidget clicker with a clean snap button and a pleasantly rich clicking feel — ready for use immediately after printing and, depending on the print setup, with a click volume of up to **70 dB+**

Important Note: For the best result, apply some oil to the side guides of the button

PLA → delivers a loud "click"

Description

Klicker is a small, ergonomic fidget tool specifically designed for FDM printers. The model is printed entirely print-in-place, requires no support structures, and needs no retrofitting. The button provides clearly defined, well-damped click feedback and can – depending on material, spring strength, and print parameters – reach **70 dB or more**

The housing lies comfortably in the hand and is suitable for both small and large hands. The integrated snap-fit mechanism works immediately after printing: remove the part, deburr lightly, and for the best performance, **apply one to two drops of oil into the side guides of the button** — the clicker is then ready.
Ideal as stress relief, a focus helper at the desk, or a small maker gift

Key Points

• Compact & ergonomic – comfortable in any hand
• Print-in-place – no supports necessary
• Clear, rich click (snap-fit spring mechanism)
• Up to **70 dB+** click volume possible
• One-piece print – no assembly
• Size & spring strength easily adjustable
• **PLA** for the best click sound
• **Important: Apply some oil into the side guides of the button**
• Perfect as a desk toy or small gift

🇬🇧 Quick Info

A compact, support-free fidget clicker with a clean snap button and a crisp, satisfying click — ready to use right off the printer and capable of 70 dB+ depending on your setup.

Important Note: For best performance, apply 1–2 drops of oil into the side guides of the button.

About the Model

Klicker is a small, ergonomic fidget clicker designed specifically for FDM printers. It prints fully print-and-place, requires no supports and no assembly. The top button provides clear, well-damped feedback and can reach 70 dB or more depending on material, spring geometry and printer tuning.

The shape fits comfortably in both small and large hands. The integrated snap-fit mechanism works immediately after printing: remove from the bed, deburr lightly, and for optimal performance apply a drop or two of oil into the side guides of the button — then start clicking.
Perfect for stress relief, focus, desk use or as a maker-friendly gift.

Key Points

• Compact & ergonomic – fits any hand
• Print-and-place – no supports needed
• Crisp, precise snap-fit click
• Click volume up to 70 dB+
• One-piece print – no assembly
• Easy to scale and adjust spring tension
• PLA for the best click sound
• Important: Add a small amount of oil into the side guides of the button
• Ideal desk toy or small gift

🇨🇳 Simplified Chinese

Brief Description

A compact, support-free fidget clicker with a crisp pressing feel, and capable of reaching 70 dB+ loudness depending on print settings

Important Note: For best results, please add 1–2 drops of lubricating oil into the side guide grooves of the button

About the Model

Klicker is designed specifically for FDM printers, using a print-in-place printing method, requiring no supports and no assembly. The top button provides clear and firm feedback, and depending on the material and spring structure, can reach 70 dB or higher

The body fits the hand shape, allowing both large and small hands to hold it comfortably. The internal Snap-Fit structure can be used directly after printing: remove from the heated bed, lightly deburr, and drip one or two drops of lubricating oil into the side guide grooves of the button to achieve the best clicking feel. It is very suitable for stress relief, focus, desk play, or as a small maker gift

Key Points

• Compact ergonomic shape
• Print-in-place, no supports needed
• Crisp and satisfying click feedback
• Click loudness can reach 70 dB+
• Single piece print, no assembly required
• Adjustable size and spring force
• **PLA can produce the best click sound**
• **Important: Add a small amount of lubricating oil into the side guide grooves of the button**
• Suitable as a desk toy or stress relief item