M&M Slider + Flip Fidget Toy (~31 mins)

Thank you for your support! If you like our family's designs - you can sell the physical prints through a paid Patreon membership: 

https://www.patreon.com/c/SpacedOutStudio

Let this fully cool after print (you can remove from the build plate) and gently twist the pin until you feel a little resistance, then twist the other way gently until it fully loosens. The hinges should move just fine. The more you play with it, the more it will loosen. PLA will work great. Some filaments will allow movement right after the print. You can also use a technique to rotate the hinges and then press the pin between your fingers to break the supports (don’t twist the pin in this case). If you have issues, please contact me and happy to help. 

The M&M Flip & Fun Fidget

Say hello to the sweetest fidget in the bowl—our M&M's themed Slide + Flip Fidget! Each one is a colorful candy circle with the classic “m” on one side… but give it a flip, slide, twist, or spin and bam! you reveal the iconic M&M character faces.

Mix and match the M&Ms logo + face for endless combinations—go serious on one side and sassy on the other, or pair chaos with chaos (highly recommended). The hinge-and-pin design makes everything smooth, snappy, and very snack-like… just remember: not edible, even if it looks delicious.

There are two profiles:

• Quick print profile with 0.2 mm layer height (but pin may stick more)
• 0.16 mm layer height that has a more robust pin