Retainer plate for epoxy adhesive WIKO Epoxy05

Stand (retainer plate) for epoxy adhesive WIKO Epoxy05

Anyone who uses this system will be annoyed, at the latest after the 10th time, that the syringe for the epoxy adhesive
is difficult or impossible to reopen. Since I have been working with epoxy adhesive for years
to glue my models, I found out that you can simply leave the syringe open, without a cap,
and place it in a tall glass (with the opening facing up). Important after squeezing out the 2-components,
always push back a piece of the components so that they do not connect at the opening.
Cleaning the openings is not necessary (it contaminates the openings).

This method lasts a very long time, keep it as cool as possible and not exposed to UV light.

After several years, I wanted to refine this method and designed this stand.
Once inserted, it doesn't wobble, and for those who want to fix it, either with double-sided tape
or mount it with two screws, there are two drill holes in the model for that.

I printed the stand (retainer plate) in PLA, other materials are also possible.

Print upright if possible, see the 3mf file and with support structure at the bottom of the base plate.
Printed on my A1 mini. If you want to test it, I would appreciate photos/comments.
The dimensions of the piston end can be found in the image view.