Shimmer vial Arcane League of Legends prop

here it is!

Finally to public my Arcane Shimmer design

This model has been a journey for me and I would like to share it with everybody else
it is very simple to make and assemble

You would need:
115 ml Clear Plastic Test Tube
submersible led tea lights (I use pink led)

The print:
Body, Top and Cap

the led light (it is designed that when you screw in the cap the light turns on by pushing it down and when you unscrew it a tiny bit it turns off)

how do you get that to work?

 > simply take your tealight and screw the battery cap all the way till it turns on

 > then unscrew it just a tiny bit to when the light turns off and it turns on when you slightly push the battery cap on

That way when you place it inside the printed Top and screw down the Cap it turns on the light by pressure

Assembly:
  > the tube goes in upside down with the cap of the tube being on the bottom of the shimmer print ( this is so the light can shine through the bottom of the tube)
 > align the top with the sides and fit in place with friction/pressure 

just print, paint and assemble to enjoy the beauty of shimmer!

-------------------------------------------------------------------------------------

The Shimmer:
I have trialed so many combinations of liquids to get a right consistency that satisfies me. 
play around with what you think would look best for you!

My suggestion
 >water

 >few drops of pink food coloring

 >1 white drop food coloring ( this is to haze/milk the water a little just so the light shines off better)

and then you can add more water to flush out too much consistency