THULE Clothesline - Suitable for Elite Van XT
Print Profile(1)
Description
Since we don't always want to string up a clothesline to dry our swimwear and towels,
I came up with this drying rod holder for the THULE Elite Van XT bike rack.
The three holders can be slid into the T-slots below the wheel rails with a center distance of 200 mm.
The rods are then held by the holders, which also offer some practical hooks, and secured with a small Spax screw (approx. 3x20 mm).
Rods with dimensions of 12 x 2 x 1000 mm are available in aluminum at almost any hardware store.
For the black aesthetic, I used GRP rods in this case. These can be found in model building assortments, e.g., at Freakware.
The concept with the PETG-printed mounts has proven itself for years on our old bus.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)