X-Action Woman figurine

X-Action Woman figurine

I printed them 100mm high. Of course, you can scale them up to make them even bigger, they'll look even nicer :)

Happy printing!

eSUN High Speed PLA+ filament (Bone White)

*0.12mm High Quality @BBL A1; 0.4 nozzle; Fuzzy skin 0.12/0.12; 3 walls, 15% infill

I publish my models only on the MakerWorld.com platform.


 

I publish my models only on the MakerWorld.com platform.

Happy printing!
 

To print my models before posting them on MakerWorld, 
I use the BambuLab A1 printer + the [BIQU Panda Buildplate CryoGrip Pro Frostbite] plate, 
which has much better adhesion than standard PEI. 
Remember to make sure before you start printing that your plate is ready for printing, it should be clean and degreased.


The models are so detailed that you need to be careful when removing supports for small elements (e.g., hands, fingers). Of course, this problem is significantly minimized when printing at a larger scale. Remember to exercise extreme caution.

The print profile is adapted to the filament you are currently printing with, remember to adjust the print parameters to the filament you want to print with, even regular PLA requires different print parameters, especially the Silk or PLA Matte version.