Search models, users, collections, and posts

Soul Wolf r1.5

s869y000
Toys & Games>Other Toys & Games
IP Report

Print Profile(3)

All
P1S
X1E
A1 mini
H2C
H2D
H2S
P2S
H2D Pro
P1P
A1
X1 Carbon
X1
X2D
A2L
0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
3 h
2 plates
4.2(20)
Weapon
Weapon
Designer
40 min
1 plate
5.0(1)
魂狼r1, Print in Place skeleton
魂狼r1, Print in Place skeleton
Designer
3 h
2 plates
3.0(2)
Open in Bambu Studio
Boost
899
2083
61
12
873
500
Released 

Description

Content has been automatically translated.
Show original

An improved version of Soul Wolf r1, this time featuring a true Print in Place frame

Added sharp angles and slanted surfaces to the outer armor

Added multi-color parts

The new and old frames and outer armor are fully interchangeable and can be used together

As usual, the frame requires a strong push for the first rotation. Use the flow rate value set for the filament to adjust joint tightness

 

XY outer contour compensation: if loose, adjust to a positive value; if tight, adjust to a negative value; adjust by 0.01 each time

Mecha
Robot
DUMMY 13

Comment & Rating (61)

(0/1000)
@popcornwisrd
looks incrediblly cool but really suffers from the print in place skeleton it's very floppy
2
Reply
@DERTAXL
what is the green filament called? bro looks good!
0
Reply
@Somebodies69
Broke at every where i tried to articulate thumbs down looked so cool too
0
Reply
@GOJO_is_THE_GOA
bro, same here I don’t understand how other people are putting it together
0
Reply
@Jonatanko
i used bambu lab PETG HF blue and nothing broke all is fine but i realized some cheaper PETG different brand can be fragile
1
Reply
@CBA3DP
I’ll post finished picks wen done
0
Reply
@user_1831710623
beautiful robot
Show original
1
Reply
@CBA3DP
:)
0
Reply
@GOJO_is_THE_GOA
OK, so after printing the armor and putting everything together, I can say it’s very good but the problem is it is floppy as hell and the instructions are not very clear I have to straighten up guess where everything went and I had to pray. One of my suggestions for this print is to have everything separated like a dummy 13 we have to put together the skeleton
1
Reply
@FinnFuture
aaaaaaaaaaaaaa
0
Reply
@Koldunya
the print in place skeleton was genius, I might see if I can make my own attachments using it as a base :D My skeleton is reasonably stiff, too, at least this Polymaker PLA and my P2S **EDIT** it became floppy and everything fell off XD I may reprint adjusted so that when the PLA shrinks it will work, and super glue the armor on
(Edited)
0
Reply
@adaken
Cool! Thanks to the author for sharing! It still hurts my fingers a bit…
Show original
0
Reply
@Afu_06_TR
Boosted
Print Profile
0.2mm layer, 2 walls, 15% infill
very nice design, perfect 👍🏻
0
Reply
@Afu_06_TR
Boosted
Print Profile
魂狼r1, Print in Place skeleton
very nice design, perfect 😍♥️
0
Reply
@CBA3DP
fully complete!
0
Reply

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

lowpoly wolf 狼
lowpoly wolf 狼
Eric.cartman
965
371
Soul Extractor - Head massager灵魂提取器
Soul Extractor - Head massager灵魂提取器
YSR
10.2 k
3.9 k
King of the Pack-15CM；群狼之王
King of the Pack-15CM；群狼之王
DDD-MAX
0
7
鉄魂 Kettlebell Keychain | Fast Print
鉄魂 Kettlebell Keychain | Fast Print
NiSal
9
9