Christmas Market - Mini Train Diorama - Free 3D Print Model

Description

Christmas Market - Mini Train Diorama

It’s Christmas time! And that means it’s time for the first X-Mas Mini Train Diorama.
This diorama depicts a small village preparing the Christmas market in the town center.
Since everything is completely covered in snow, a small snow removal vehicle has to clear the paths.
At the same time, the colorful Christmas train delivers building materials and/or presents for the market

Just like in the previous dioramas, turning the hand wheel on the side sends the little train chugging forward and also the little snow-clearing vehicle drives through the streets. To make the ride a bit more random, I came up with a different mechanism for the handwheel.
The vehicle briefly stops at three points before continuing its journey.

Of course this diorama is “Beginner Kit Motor Box” and “CyberBrick Motor Box” compatible. And the new locomotive and wagon are compatible to the previous Dioramas. Beside that the wagons could be loaded with different materials.

Boost Me (for free)

**More is coming…check the “Mini Train Collection” and leave a follow👍**

Printing:

I placed some of the small parts twice on the print bed, because in terms of time and purge it makes hardly any difference. This way you have a spare part or can choose the one that looks better.

Following PLA Basic Filaments are used

White

Silver/Grey

Black

Cocoa Brown

Mistletoe Green

Yellow/Gold

Red

Desert Tan (PLA Matte)

Blue (just presents)

Other colors are possible of course, look what you have in stock.

I think it could be easy done with single color, if you want to color from hand.

I printed with a 0,4mm nozzle! Iam very pleased with the result, but you can try a 0,2 nozzle as well.

Assembly:

You need 8pcs round 4x2 magnets and glue.

**Insert 3pcs Magnets in the train & wagons with same polarity direction**

**Insert 3pcs Magnets in the 3 pins all with same polarity but opposite direction than before! The Pins must attract the train!**

Press 1 magnet sidewaysa in the vertical pin. (You need just one)

Slide one 4x2 magnet into the snow clearing vehicle. The polarity doesn't matter (You need just one vehicle)

Insert the vertical magnet pin at the arrow location and slide it to the side. Make sure the magnet faces to you, as shown

Insert the other 3 pins each with a wagon or train on the other side, to hold them in place.

Arrange pins and make sure all pins could be captured from the wheel Push the wheel above all pins. The wheel should snap in.

Remove the train and vehicle. Take both terrain parts and glue them with the trees to the correct spot.

Glue the roofs to the houses. And glue them into the terrain.

The snow vehicle can only turn in one direction. If you want to drive in the other way you must rotate the vertical pin holder 180°

I hope you like this little project.

If you want to support me, you can simply follow, boost & like the model.

You want to sell printed parts from my designs? Commercial license you get at my Makerworld profile or on Patreon:

https://www.patreon.com/BamBamDesign/

Membership

You want to sell printed objects from my designs or just support my work? Now you can subscribe on Makerworld! Thank you!

Join

snow clearing vehicle

snow removal vehicle

toy

Comment & Rating (53)

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.