Jonny Cash hueforge
Print Profile(1)
Description
Boost Me (for free)
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 132.49x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.08mm
Filaments Used:
#000000 PLA+ Esun Black Transmission Distance: 0.5
#646464 PLA+ Sunlu Grey Transmission Distance: 3.5
#0cc1f5 PLA+ Esun Space Blue Transmission Distance: 4
#ff7713 PLA+ Esun Orange Transmission Distance: 5
#f6e6b4 PLA+ Devildesign Skin Transmission Distance: 2.5
#feffe7 PLA+ Copymaster Bone White Transmission Distance: 3.5
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Grey
At layer #9 (0.8mm) swap to Space Blue
At layer #12 (1.04mm) swap to Orange
At layer #18 (1.52mm) swap to Skin
At layer #22 (1.84mm) swap to Bone White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)