Parametric Dispenser for Sanitary Pads

Commercial License: If you would like to sell physical prints of this model, you can get a commercial license on my Patreon:

patreon.com/rokel3D

Parametric Dispenser for Sanitary Pads

This is a simple and functional dispenser for sanitary pads.

The open-front design makes it easy to grab one pad at a time, and the model prints cleanly without supports.

It is fully parametric model, allowing you to adjust it to different pad sizes or storage needs.

Explore more parametric models here.

The dimensions x and y represent the internal size of the dispenser.

You simply measure the pads you want to store, enter those dimensions, and the shell thickness is added automatically around them.

Parameter Explanation

x

Internal width of the dispenser. Set this to the width of the pads.

The shell thickness is added around this value.

y

Internal depth of the dispenser (front to back). Set this to the depth of the pads.

The shell is added on the outside.

z

The height of the dispenser. Defines how many pads can be stacked vertically.

shell

The wall thickness of the model. For 0.4 mm nozzles typical values are: 1.6 mm, 2.0 mm, 2.4 mm (multiples of your extrusion line width).

openingHeight

The height of the opening in the front. A bigger value makes pads easier to grab; a smaller one increases stability.