Instax polaroid frame with pattern interchangeable - Free 3D Print Model

Search models, users, collections, and posts

Citron Design Lab

Household>Decor

IP Report

Print Profile(1)

All

X1E

H2C

H2S

P2S

P1S

H2D Pro

X1 Carbon

P1P

H2D

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

5.4 h

3 plates

5.0(7)

Open in Bambu Studio

Boost

329

1053

163

Released

Description

I have created this frame that is in 3 parts :
1. The base that receives the picture

2. The cap to close this base with a simple system

3. The pattern cover interchangeable

On the sliced document, you will find 2 bases and caps and 8 patterns that I have designed.
You can create your own and add them to the list.

The base has several use case as you can hang it, add some magnet diameter 6mm in space prepared for it (just stack it in) or use the feet prepred for that purpose

Comment & Rating (16)

@Bobshmow

Print Profile

0.2mm layer, 2 walls, 15% infill

The profile uploader has replied

@alquimia3D

very nice!!

@whiteharlequin

Print Profile

0.2mm layer, 2 walls, 15% infill

It's a bit difficult to remove a photo once it's inserted.

(Edited)

The profile uploader has replied

@alquimia3D

hey! To put the picture in or out, just slide it it by raising the foot leg of the frame. This should come out easily please let me know if you face any issue, I can send a video

@whiteharlequin

Hey, thanks for the response! I think I found an easy method to remove photos, which is by grabbing those hexagon-shaped flaps near the top of the back of the frame. I don’t have to swap them frequently so it’s not a big issue! On the other hand, I can’t open the back legs to make the frame stand on its own. Maybe it’s because I used PLA instead of PETG, but it looks like the back legs are fixed in place.

@powergg

it doesn't need support at all

The designer has replied

Show original

@alquimia3D

correct. no support needed

Show original

@user_421565482

This is an amazing one! Is it possible to make one version for Polaroid(square format)?

The designer has replied

@alquimia3D

hello! I have worked on the square and Wide version but I got some issues with measures because I didn't have the picture in front of me... I expect to do that in few months

@kbsd

this is really amazing. wondering if you have the square format available?

(Edited)

@rexprojects

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

they Look realy beautiful and have a clever mechanism for the top and the stand. Love it!

The profile uploader has replied

@alquimia3D

thanks for the boost!

@capitainecroche

Print Profile

0.2mm layer, 2 walls, 15% infill

@Trico1orFox

Print Profile

0.2mm layer, 2 walls, 15% infill

@kurapat

Print Profile

0.2mm layer, 2 walls, 15% infill

@tryxtyflyx

Print Profile

0.2mm layer, 2 walls, 15% infill

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.