Raise3d N2 plus Nozzle cleaner

This is Nozzle cleaner for Raise3d N2 /plus if you convert to Voron toolhead. I upload STEP file to you can mod better. 

Im using A4T toolhead with TAP. 

[gcode_macro START_PRINT]

description: Safe startup with mesh calibrate, load profile, purge line

# Usage from slicer: START_PRINT BED=[first_layer_bed_temperature] EXTRUDER=[first_layer_temperature]

gcode:

{% set BED = params.BED|default(60)|int %}

{% set EXTRUDER = params.EXTRUDER|default(210)|int %}

G90 ; Absolute positioning

#G28 ; Home all axes

#G1 X2 Y2 F6000 ; Move to front-left corner

G28 X0 Y0 ; Moving home only XY

M140 S{BED} ; Start heating bed

M104 S160 ; Preheat nozzle to 150C

M190 S{BED} ; Wait for bed temp

M109 S160 ; Wait for nozzle preheat

G28 ; Home again after heating

G1 X2 Y2 Z5 F9000 ; Move to front-left corner

M117 Nozzle Cleaning

G1 Z3 F600

G1 X55 f12000

G1 Y3

G1 X8

G1 Y2

G1 X55

G1 Y3

G1 X18

G1 Y2

G1 X55 f12000

G1 Y3

G1 X8

G1 Y2

G1 X55

G1 Y3

G1 X18

G1 Y2

G1 Z5 F600

M117 Probing mesh...

BED_MESH_CALIBRATE

BED_MESH_PROFILE SAVE=default

BED_MESH_PROFILE LOAD=default

G1 Z10 F6000 ; Move nozzle up

G1 X2 Y2 ; Move nozzle to start position

M117 Heating nozzle...

M104 S{EXTRUDER} ; Heat to printing temp

M109 S{EXTRUDER} ; Wait for nozzle to reach printing temp

M117 Adaptive purge

ADAPTIVE_PURGE

M117 Ready to print!