TWIN TW 242E Magnet Emergency Release for Lowering
Print Profile(1)
Bill of Materials
Description
For Twin Busch TW242 E
4x PRINT
Magnetic release emergency release wedges, these are clamped behind the 4 magnetic safeties so the vehicle can be lowered without a large hub movement, which is normally required for lowering
USE AT YOUR OWN RISK
If the ceiling height is not sufficient and you have accidentally driven the vehicle too high and it now threatens to collide with the ceiling during the normal lowering process
USE AT YOUR OWN RISK
Pull out the threaded rod on the magnets by hand, place the wedge under, on all 4 releases.. with the Lock button lower the vehicle without hub
After lowering from the critical area Lower the vehicle completely Remove emergency release wedges
NOTE The locking mechanisms no longer function this way These are only restored after removing the wedges and the next hub to the first detent LOCK POSITION
USE AT YOUR OWN RISK NO LIABILITY
like, rate, boost, comment
Boost Me (for free)
Support
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)