Gridfinity Lightweight Base Plates
Print Profile(2)
Description
This is a single part non-stacked version if you don't have an AMS of https://makerworld.com/en/models/1927235-gridfinity-lightweight-stackable-base-plates#profileId-2068478 for those who don't want to break apart the other one to make a profile.
I would still recommend printing 1 layer of support material for the peanuts and then manually swapping them, but if you have good bed adhesion you can print without the raft of support material.
Spacers system is uploaded separately here https://makerworld.com/en/models/1927579-gridfinity-lightweight-spacers#profileId-2068879
Bins are also available here https://makerworld.com/en/models/2258913-djr-engineering-gridfinity-bin-catalog#profileId-2460951
Feel free to browse my other gridfinity models. https://makerworld.com/en/collections/4365706-djr-engineering-gridfinity
- Peanut Plate Removal
- Recommend and puddy knife and just sliding it under all the way down instead of trying to peal it off. If you try to just peal it off it will likely just knock off all the peanuts from the support and make installation a little more tedious. Ideally you just leave them on the strip till you need them.
- A1 Mini
- I have confirm the following sizes in the Smaller than 5x5 profiles will fit on the A1 Mini, but you may just need to move the prime tower inside one of the openings like is done on some of the larger trays. It may throw a warning, but I have had no issues. The only reason it doesn't list the A1 Mini is because some of the larger parts fail the fit check in the profile.
- 1x2, 1x3, 1x4, and 1x5
- 2x2, 2x3, and 2x4
- 3x3 and 3x4
- 4x4
- I have confirm the following sizes in the Smaller than 5x5 profiles will fit on the A1 Mini, but you may just need to move the prime tower inside one of the openings like is done on some of the larger trays. It may throw a warning, but I have had no issues. The only reason it doesn't list the A1 Mini is because some of the larger parts fail the fit check in the profile.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (16)