Christmas Candy Cane bookmark
Print Profile(2)
Description
Boost Me (for free)
if you find my art good enough please consider boosting ;) thanks
click on the banner to support me or get commercial license to be able to sell prints
*be honest, respect someone's work*
To fit on A1 mini without risk, size it about 5mm less from top and bottom ( change only X and Y axis, do not change Z axis)
Or just turn it at an angle to fit only one bookmark at a time.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Use small flame torch to get rid of small impurities
The Model is 50x180mm in size
Filaments Used:
#000000 PLA Kingroon Black Transmission Distance: 0.4
#482960 PLA BambuLab Basic Indigo Purple Transmission Distance: 1.1
#00f52c PLA+ Sunlu Green Transmission Distance: 10
#ecffff PLA Kingroon White Transmission Distance: 4.5
This print uses 4 unique filaments but feel free to use yours, play with colors to get different results ;)
Swap Instructions:
Start with Kingroon Black
At layer #6 (0.56mm) swap to BambuLab Basic BambuLab Green
At layer #12 (1.04mm) swap to BambuLab Basic Maroon Red
At layer #18 (1.52mm) swap to Kingroon White for the rest.
Thank you for trying my model ;)
Find all my bookmarks under this link :
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (6)