Ball joint for action figure with boolean model
Print Profile(3)
Description
Ball joint for action figure, can be used to create or modify action figures.
New 3D boolean assets added! I've pre-adjusted the tolerances so you can perform boolean operations directly—making it much easier to create articulated models.
You might need to adjust the scale slightly depending on your specific filament and print angle for the best results.
Please adapt the model to the dimensions shown in the image.
Because the contact surface area is very small, please ensure the print plate is clean, and apply glue if necessary.
Added a 4mm ball joint with a 2.5mm shaft diameter and 4mm depth. Testing shows that a 0.2mm nozzle must be used for printing; while a 0.4mm nozzle can print it, the joint won't function properly. Please select the print profile to download.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (68)