Door draft stopper
Print Profile(1)
Description
Door draft stopper.
Unfortunately, the flooring at my front door is uneven, so I couldn't put anything under the door or behind it to eliminate drafts. This was the only way.
It is a TPU strip, divided into several pieces that fit together with a dovetail joint.
They have a ~1mm recess underneath so that double-sided tape can be applied. I used 3M tape, ~1.2mm thick.
The draft stopper is approximately 6.5mm high and 20mm wide.
001+002+003 Pieces ~250mm long
004 L=95, to be adjusted according to the clear opening of the door.
First, test how they would fit when hooked and positioned at the door jamb. Glue them together, apply the double-sided tape, and position them at the door jamb.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)