Toyota bZ4x Center Console Coin & Remote Container

Center console coin and remote container for 2024 Toyota bZ4x. It may also fit in the Subaru Solterra, but I don't have one to test the fit.

It goes in the back of the factory bin so it doesn't block access to the other stuff inside. This may make it a little hard to reach for some people, but it works great for me. I also placed a felt liner on the bottom of the coin section to reduce the noise a bit when making sharp turns.

The model is parametric to fit any size garage remote. The my remote is about 33x16mm but I set the space to 40x20mm to make it easier to put in without looking. The default bin size is 40mm which can also be changed, but it should be less than the height of your remote because there's extra space above it in the bin and it'll be harder to grab if it fits exactly.

There's a pretty bad “hull line” when printing with default settings, but I was able to get rid of it mostly by enabling the “Print infill first” setting.