Amiga A500 Display Stand (eg. ZSUS PM14A-2K)

Amiga A500 Display Stand - Portable Monitor Mount

A practical solution for mounting a portable display on your Amiga 500. This print consists of two brackets that hold a display on top of the A500 case.

Technical Details:

• Designed around the ZSUS PM14A-2K display from AliExpress, but should work with other portable displays of similar size
• The brackets clip directly into the ventilation slots on top of the A500 case (you know, those iconic horizontal vents)
• This provides a secure mount without any modifications to the case itself
• Works particularly well if you want a compact retro setup or need a display for testing

Print Settings:

• Layer Height: 0.2mm
• Walls: 3
• Infill: 20-25%
• Top/Bottom Layers: 5

These settings should give you good strength for the clipping mechanism while keeping print time reasonable.

If you find this useful, I'd appreciate a boost - it helps with visibility and motivates me to design more Amiga and retro computing related models. Feel free to remix or modify for your specific display if needed.