YOOOO

cover

图片_20251118221555.jpg

plate_1.png

2025-11-18_b2b2d0ba11a74.jpg

图片_20251118223946.png

以100%填充的层高度为0.08mm首层高度为0.16mm 更换耗材丝说明：      开始 Black     在层#12（1.04mm）更换到Ash/Dark Gray     在层#16（1.36mm）更换到Bone White     在层#21（1.76mm）更换到Jade White 直到结束。

Layer height of 0.08mm with 100% infill, first layer height of 0.16mm Filament change instructions:      Start Black     Change to Ash/Dark Gray at layer #12 (1.04mm)     Change to Bone White at layer #16 (1.36mm)     Change to Jade White at layer #21 (1.76mm) until the end

0.2mm nozzle, 0.08mm layer, 4 walls, 100% infill

1_50x50mm

2_50x50mm

plate_2.png

3_50x50mm

plate_3.png

4_50x50mm

plate_4.png

18d0be4dc521d223228405a6940570d.jpg

414a722a4140fa4997a12311529ac1e.jpg

39c79d59bf7e6437e7354ad45c99703.png

1daa101cfb66e86fe90f576feccf7d1.png

b4f819e1ba5f5ce28effd59b48bc12e.png

f8c071ec6429f0af2a345ae746ac541.png

注意每盘预设的换料是不一样的，不要把不同的图案合在一个盘上打。如果需要缩放图案，请记得把z调回初始值（以下列出的实际厚度）&nbsp;以下是每一盘的描述和换料指南：1_50x50mm您可以在低于基础厚度0.48mm的更高层高度打印  最大允许厚度厚度2.24mm和实际厚度2.24mm  更换耗材丝说明：      开始 Black     在层#12（1.04mm）更换到Ash/Dark Gray     在层#18（1.52mm）更换到Bone White     在层#23（1.92mm）更换到Jade White 直到结束。&nbsp;2_50x50mm您可以在低于基础厚度0.48mm的更高层高度打印  最大允许厚度厚度2.24mm和实际厚度2.23997mm 更换耗材丝说明：      开始 Black     在层#17（1.44mm）更换到Ash/Dark Gray     在层#20（1.68mm）更换到Bone White     在层#23（1.92mm）更换到White 直到结束。   3_50x50mm您可以在低于基础厚度0.48mm的更高层高度打印  最大允许厚度厚度2.48mm和实际厚度2.48mm 更换耗材丝说明：      开始 Black     在层#17（1.44mm）更换到Ash/Dark Gray     在层#23（1.92mm）更换到Bone White     在层#28（2.32mm）更换到White 直到结束。 &nbsp;4_50x50mm您可以在低于基础厚度0.48mm的更高层高度打印  最大允许厚度厚度2.24mm和实际厚度2.24mm 更换耗材丝说明：      开始 Black     在层#16（1.36mm）更换到Ash/Dark Gray     在层#21（1.76mm）更换到Bone White     在层#24（2mm）更换到White 直到结束。

Note that the pre-set filament changes for each plate are different, do not combine different patterns on one plateIf you need to scale the pattern, please remember to reset z to its initial value (actual thickness listed below)&nbsp;Below are the description and filament change guide for each plate:1_50x50mmYou can print at a higher layer height below the base thickness of 0.48mm Maximum allowed thickness 2.24mm and actual thickness 2.24mm Filament change instructions: &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Start Black &nbsp;&nbsp;&nbsp;&nbsp;At layer #12 (1.04mm) change to Ash/Dark Gray &nbsp;&nbsp;&nbsp;&nbsp;At layer #18 (1.52mm) change to Bone White &nbsp;&nbsp;&nbsp;&nbsp;At layer #23 (1.92mm) change to Jade White until end.&nbsp;2_50x50mmYou can print at a higher layer height below the base thickness of 0.48mm Maximum allowed thickness 2.24mm and actual thickness 2.23997mm Filament change instructions: &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Start Black &nbsp;&nbsp;&nbsp;&nbsp;At layer #17 (1.44mm) change to Ash/Dark Gray &nbsp;&nbsp;&nbsp;&nbsp;At layer #20 (1.68mm) change to Bone White &nbsp;&nbsp;&nbsp;&nbsp;At layer #23 (1.92mm) change to White until end.  &nbsp;3_50x50mmYou can print at a higher layer height below the base thickness of 0.48mm Maximum allowed thickness 2.48mm and actual thickness 2.48mm Filament change instructions: &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Start Black &nbsp;&nbsp;&nbsp;&nbsp;At layer #17 (1.44mm) change to Ash/Dark Gray &nbsp;&nbsp;&nbsp;&nbsp;At layer #23 (1.92mm) change to Bone White &nbsp;&nbsp;&nbsp;&nbsp;At layer #28 (2.32mm) change to White until end. &nbsp;4_50x50mmYou can print at a higher layer height below the base thickness of 0.48mm Maximum allowed thickness 2.24mm and actual thickness 2.24mm Filament change instructions: &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Start Black &nbsp;&nbsp;&nbsp;&nbsp;At layer #16 (1.36mm) change to Ash/Dark Gray &nbsp;&nbsp;&nbsp;&nbsp;At layer #21 (1.76mm) change to Bone White &nbsp;&nbsp;&nbsp;&nbsp;At layer #24 (2mm) change to White until end. &nbsp;

<h2>致敬漫画<a target="_blank" rel="noopener noreferrer ugc" href="https://moegirl.uk/False_Knees">False Knees</a>原作者Joshua Barkman，只是私人分享，请勿商用！！！！！</h2>如果喜欢请多多支持原作者！！！<h3> </h3><h3>注意：</h3><ul><li>版画模型“总”的打印时长是18小时，请务必使用0.2mm喷头不然字会看不清，细节也会缺失；</li><li>可以适当缩放但是容易缺失细节，觉得太大的话，我会陆续上传调整好的单幅50x50mm的方便做成冰箱贴；</li><li>尽量使用我预设好的参数，可以大幅节省切片时间。</li></ul>&nbsp;2025/11/25：更新了每个格子拆开的版本，注意这个版本每一个格子换色是不一样的不要放在一盘打印。  <boostme><boosttitle>为我助力</boosttitle><boostcontent>你的助力是我的动力啊喂！！！</boostcontent></boostme>

<h2>Homage to the comic<a target="_blank" rel="noopener noreferrer ugc" href="https://moegirl.uk/False_Knees">False Knees</a> by original author Joshua Barkman, for private sharing only, please do not use commercially!!!!!</h2>If you like it, please support the original author!!!<h3> </h3><h3>Note:</h3><ul><li>The total printing time for the print model is 18 hours, please be sure to use a 0.2mm nozzle otherwise the text will be unclear and details will be lost;</li><li>It can be scaled appropriately but details are easily lost; if you think it's too large, I will upload adjusted individual 50x50mm pieces for easy use as refrigerator magnets;</li><li>Try to use my preset parameters, which can greatly save slicing time.</li></ul> 2025/11/25:Updated the version with each square separated, note that the color changes for each square are different in this version, so do not place them on a single plate for printing. <boostme><boosttitle>Boost Me</boosttitle><boostcontent>Your boost is my motivation!!!</boostcontent></boostme>

Print Profile(2)

Description

Homage to the comicFalse Knees by original author Joshua Barkman, for private sharing only, please do not use commercially!!!!!

Note:

Comment & Rating (0)

License

Related Models

3D Printed Comic: Heading to the Dock for Some Fries