Audi Q5 Keychain (working wheels)

If you enjoyed this model, remember to like, follow, and support my work with a nice 

If you're interested in using my models, several membership plans are available, even if you just want to buy me a coffee to show appreciation for my work :D

If you have any requests, don't hesitate to ask in the comments or personal messages!

For anything, don't hesitate to contact me; every request will be fulfilled promptly!

Audi Q5 Keychain 

A perfect miniature replica of the iconic Audi Q5. This model has been optimized for 3D printing and is designed to be used as an elegant and detailed keychain.

Despite its small size, the model faithfully captures the lines and distinctive features of the Q5, ideal for those looking for a robust yet non-bulky keychain.

Fine resolution (0.12mm - 0.16mm) is recommended to capture all the details, especially on the wheels and the front grille.

No assembling needed! Just a PIP model done with AMS and 0.4 mm noozle! And working wheels!

Carry your automotive passion with you everywhere!

And remember to

And don't forget to

Every model is PIP; the wheels are actually working.

I used AMS to achieve optimal multicolor results.

The model requires no assembly; you just need to carefully remove the tree supports already set in the print profile.

Better results can be achieved using the 0.2 mm printhead, at the expense of increased print times.

It's recommended NOT to change the print profile settings to avoid having problems with the final result.

I invite you to use tweezers and small pliers to remove the supports.

In more recent models, I've used smaller tolerances for the wheel alignment, to ensure a higher level of detail and fewer supports to remove in that area.

For this reason, it's necessary to "break in" the car once the supports have been removed (trying a couple of times) :D