Print Profile(4)
Description
We’ve decided to open up our lamp designs to the maker community and allow anyone to print one!
The Cumulis lamp has been a customer favourite at Dryft Home thanks to its soft, rounded silhouette and pleated texture — and now you can make your own version at home. If you can't print one yourself and you're in Canada or USA, consider supporting us at https://www.dryfthome.com.
Inspired by towering cumulus clouds, the Cumulis shade creates a warm, gentle glow that works beautifully on a desk, side table, or bedside stand. It’s a fully 3D-printed design and you can pair it with either of our two modern lamp bases: the minimalist Peak base or the ribbed Ridge base.
For the best results, follow the Orca Slicer settings below. We’ve also included Bambu Studio 3MF files to make printing easier — they haven’t been fully tested, so please check your settings before printing. In Bambu Studio you need to implement scarf seams in filament settings if you are using a different filament for the bases.
Print Details – Cumulis Shade
- Printer type: FDM
- Material: PLA - White recommended
- Layer height: 0.2 mm
- Size: 160mm wide by 200mm tall
- Filament needed: ~100g
- Nozzle size: 0.4mm
- Line width: 0.6mm
- Sprial Vase mode: On
- Brim: No brim
- Supports: No
- Bottom layers: 5
- Top Layers: 0
- Infill density: 0%
- Outer wall speed: 100mm/s or less
Print Details - Peak or Ridge Lamp Base
- Printer type: FDM
- Material: PLA - Matte filament recommended
- Layer height: 0.2 mm
- Peak Base Size: 130mm wide by 100mm tall
- Ridge Base Size: 190mm wide by 195mm tall
- Filament needed: 90-140g
- Nozzle size: 0.4mm
- Line width: default
- Bottom/Top layers: default
- Infill density: 15%
- Sprial Vase mode: Off
- Wall loops: default (2)
- Brim: No brim
- Supports: No
- Seam position: Back
- Staggered inner seams: checked
- Scarf joint seam: Contour and hole
- Scarf joint speed: 75%
- Scarf joint for inner walls: checked
- Wall Order Ridge: Outer Inner
- Wall Order Peak: Inner, Outer, Inner
For the 40mm lock washer, print in flexible filament. We use 95A TPU, 10% infill, 1 wall loop, 3 upper and 3 lower walls.
Assembly
To assemble the lamp, you’ll need a cord. We recommend a cord about 6 ft long with an inline rocker switch about 1.5–2 ft from the socket. The socket must be 40mm wide with a threaded base, as shown in the photos. We normally use a cord with an E26 standard bulb base and a US/CA plug. Use LED bulbs only to avoid heat buildup — 9W or less recommended.
You can easily find lamp cords online, but if you want the exact one we use, it’s available here:
https://www.dryfthome.com/products/table-lamp-cord?variant=45162499932217
Assembly video (same process as Mammatus):
https://cdn.shopify.com/videos/c/o/v/1761d9ace59a4949adf04db5f30c1c1f.mp4
If you’d rather skip printing and receive a finished lamp, the Cumulis Table Lamp is available here:
https://www.dryfthome.com
Pendant Alternative
The Cumulis shade also works beautifully as a pendant light. You’ll need a pendant cord with a 40mm threaded E26 socket and a ceiling canopy. These are widely available online, but if you’d like the exact one we use, you can find it here:
https://www.dryfthome.com/products/pendant-light-cord
Commercial License
If you're interested in printing and selling our lamp designs please explore the commercial license options on our profile.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (398)