LE60 Technic brick bearing block - Free 3D Print Model

Search models, users, collections, and posts

Manuarmata

Hobby & DIY>Other Hobby & DIY

IP Report

Print Profile(1)

All

P1S

P1P

X1E

X1 Carbon

H2D

H2C

H2S

H2D Pro

P2S

A1 mini

X2D

A2L

0.2mm layer, 3 walls, 15% infill

Designer

30 min

1 plate

5.0(3)

Open in Bambu Studio

Boost

189

127

Released

Description

Bearing block for technic models.

1 unit wide 3 units high and 5 units wide.

Perfect for fast spinning axles and heavy loads.

Avoids friction damage.

Needs to be greased with white vaseline.

Needs bedding in for the best result.

How to assemble:

Tip: Adding grease before assembly makes the rolls stick

Comment & Rating (12)

@PickleElf

"LE60" is not how you spell Lego.

The designer has replied

@user_3311474486

the word Lego is not allowed in Makerworld.

@PickleElf

Replying to @user_3311474486 :

Fair enough.

@ID_Spud

Replying to @user_3311474486 :

but you just said Lego

@Garrett6777

was an easy print, but putting it together was a little tedious, also I ran it up to 10,000 rpm with 0 problems! I would also like to say it's easier to assemble if you keep it on the plate and put the pins in, then take it off when there all in

(Edited)

The designer has replied

@user_3311474486

If you like LE60 a little assembly is part of the fun, but 20 minutes is indeed way to long and probably very frustrating in the end. I will add photo's of how to assemble in the description. It should not take more than two minutes per bearing. Print in place is not an option. it requires much bigger tolerances, which is fine for a spinning widget toy but it would make this part pointless. Try printing one of the many print in place 608 bearings on maker world and you will see what i mean.

(Edited)

@Garrett6777

fair enough, I'm new to 3d printing so I'm not really sure what is possible or not, thanks for responding to me!

@StalwartKnight

AMAZING IDEA!!!!

@Garrett6777

Print Profile

0.2mm layer, 3 walls, 15% infill

(Edited)

@user_3081776867

Print Profile

0.2mm layer, 3 walls, 15% infill

@user_3418862947

Print Profile

0.2mm layer, 3 walls, 15% infill

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.