Oil BOX V2
Print Profile(7)
Description
Version 2 oil can
- Dimensions:
Base height: 88 mm
Height including cap: 140 mm
- Approximate volume: 50 ml
- The oil can is refillable
- The diameter of the end cap hole is 1.2 mm for better liquid flow
- New shape for better grip
The best way is to print the base of the oil can from TPU because you can press it easily.
PLA BASIC or PETG can also be used. Print profiles are available. When using materials such as PLA or PETG, it is necessary to apply slightly more pressure to the body of the oil can.
Please NOTE:
Make sure you print the base of the oil can on a textured PEI plate. Experience has shown that this is the best way, as the bottom of the oil can is impermeable. It is also necessary to print the body of the oil can with 100% infill.
Either a TPU cap (available) or an O-ring measuring 16x1mm or 16x1.5mm (OD x thickness) can be used as a seal between the oil can body and the tail piece itself.
It can be print easy without any supports.
If you have any question jus ask me.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)