Speck B (1/24th Scale) Pit Stand Micro RC Buggy

This is a super simple work stand or display stand for a Hobby Plus Speck-B. 1/24th scale RC Car.

Its very similar to a Losi Micro-B but I do not have one to evaluate whether it will also fit in this stand or not.

Stand uses a simple 608ZZ bearing at the top to enable the turning function. No glue necessary, bearing fits into the bottom of the stand and the post fits relatively firmly in the base. 

Ive generally printed in the arranged format, but you need to slow the walls (inner and outer) down to 100mm/s or so print speed or the base tends to sag or deform while printing in PLA. I recommend doing 4 loops and 15% gyroid infill, but feel free to use whatever makes you comfortable there.

The whole print is relatively fast, just over 3 hours and a little under 120g of filament so its a fairly inexpensive print.

Feel free to modify the base to work best for what you want to hold, I was just starting to experiment with the best layout.