Lidl Glider Pusher Power Pod

Summary

Lidl Glider Pusher Power Pod

Designed for 12 x 12 mm M2 hole mount.
I used a Racerstar Racing Edition 1806 motor with a 4" prop.

Designed to be printed with no supports. To make it stronger, print at a higher temperature.
V2 is for motors shaft that stick out past the motor base.

For the 12 x 16 mm mount
https://makerworld.com/en/models/812793-lidl-glider-pusher-power-pod-12-x-16mm#profileId-915834

For the 16 x 19 mm 3mm mount
https://makerworld.com/en/models/20214-lidl-glider-pusher-power-pod-16-x-19mm#profileId-748039

For the 16 x 16 mm 3mm mount

https://makerworld.com/en/models/1464518-lidl-glider-pusher-power-pod-16-x-16mm-motor-mount#profileId-1527555

My set-up
3S 1000mah lipo
3 x 5 gram servos
3 bladed 4 inch prop
Racerstar Racing Edition 1806 75 watts at full power
25a ESC
All up, weight 320g

Flight video https://youtu.be/dKA-KWGKGeA

Print Settings

Rafts: 

No

Supports:                      

No

Resolution: 

200

Infill:                      

20

Filament:

ESUN PLA +                orange                    
                        

Notes:                     

Printed at 215 degrees