FÖRNUFTIG Upside Down Ceiling Mounting

FÖRNUFTIG Upside Down Ceiling Mounting

I have the X1C printer closed in a cabinet. I was looking for a compact air purifier that would fit in the space. I found a great IKEA FÖRNUFTIG model, which is flat and has a fan outlet with controls on the top. The speed of the fan is set with a rotary switch, so that after turning on the electricity, it starts at the pre-set intensity. I was able to use all these advantages when installing the cabinet under the ceiling. Thanks to the textile handle, it is possible to slide out the cleaner at any time and clean/replace the filter.

For fastening, use a screw with a diameter of up to 3.5 mm.

The parts of the corner version are connected using the PIN that you can find in the print profile.

Versions

I needed to fix the air purifier to the ceiling so that it takes up as little space as possible, and this is where my model comes in. A total of 4 variants are available, depending on the cabinet you have - right corner, left corner, only the back wall or no wall. Choose the specific version for you from the photo.

1. My variant, which you can see in the photo, is placed in the cabinet on the right side and in the back corner

   

    

2. Left corner

   

    

3. No wall

   

    

4. Back wall only

   

Happy printing!