Tine Cultivator 1:32 - Free 3D Print Model

Search models, users, collections, and posts

Clemgar

Hobby & DIY>Other Hobby & DIY

IP Report

Print Profile(1)

All

X1 Carbon

H2S

P2S

H2D

P1S

P1P

X1E

H2D Pro

H2C

X2D

A2L

0.12mm layer, 2 walls, 15% infill

Designer

2.2 h

2 plates

4.0(3)

Open in Bambu Studio

Boost

114

162

Released

Description

Content has been automatically translated.

Show original

Hello ,

Here is my first scale model. It is a 1:32 scale tine cultivator / field cultivator. It is compatible with Siku or Universal Hobbies / Britains type models. I was strongly inspired by the Terrano model from the Horsch brand. The spiked wheel part is difficult to assemble; the 3D file would need to be modified. You can paint it with model paints to create a metallic effect. I made the hoses with pieces of metal taken from spiral notebooks. All parts must be glued together.

IF you have any questions, feel free to send them.

IF some people want the SolidWorks file to try and modify the cogwheel supports, you are welcome, send me a message.

Comment & Rating (3)

@raphzor

Print Profile

0.12mm layer, 2 walls, 15% infill

Good effort for shareing this cool design, but the profile need several changes. As mentioned on the description, the disk harrows don’t work, so they shouldn’t be on the profile, it was just waste. Also I’ve added support for the pistons, and split the parts for the A1 mini. I don’t know why exactly the chosen angle for printing the main part, but the finishing of the bottom (that is unseen) is better than the top, and because we’re printing alongside the main axle, some assembled parts get loose, and some are very tight. A small design change (adding small chanfers where the parts must fit) could make them snap fit, instead of having to glue the whole thing, making the overall assembly easier. I don’t want to be negative or disencourage, but just wanted to give some honest feedback, that could improve your future designs. Again, thanks for sharing ☺️