Mini Pixel Pumpkin Pie Slice & Pie Pan

When you're in the mood for a little slice on pie - this fidget just might do 🥧 which is why I scaled down my Pixel Pie Slice Fidget to make these mini versions 🥧 I printed this in orange (for a Pumpkin Pie Slice), but it would work well in brown (chocolate), white (coconut cream), yellow (lemon), lime green (key lime), etc.  Print six slices to make a whole pie. I have also designed a pie dish to store them in 🥧

Dimensions of Pie Slice (assembled): 2 ¼ in x 2 in x ⅞ in

Dimensions of Pie Pan: 5 inches in diameter x ½ in.

Layer Height 0.2mm

Infill 15%

Supports needed under the lip of the pie pan

Basic PLA is always the best for this type of fidget.  That being said, I did do the crust in a Matte PLA filament and it did fine but I recommend doing the ‘filling’ in a Basic PLA. I recommend the majority of the print in Basic PLA because the print is very detailed (on the inside) and the tolerances are small.  I printed several of these in these three types of filaments and Basic PLA always printed the best and had smoother “movement” when done.

I have included a 3mf with the following print profiles: 

Print Plate #1 (Slice_whip cream): 3 colors

Print Plate #2 (Crust): 1 color

Print Plate #3 (Pie Pan): 1 color, supports added under lip of pan

Note: I added an increased Z hop of 0.8mm to all the filaments in my 3mf to give the print head a little more clearance as it moves around.  

To assemble, fit the pie crust onto the end of the pie slice. It should be a snug fit but feel free to add a little super glue if you would like:)

My designs are free for personal and non-commercial use. I offer a commercial license on Thangs. Here is a link if you'd like to check it out 👉 https://thangs.com/designer/3DPmom

If you like my work and want to help support it, you can buy me a Diet Coke at https://www.buymeacoffee.com/3dpmom Thanks so much!

Enjoy! 🥧 

Erin