Multi - Clean Handy

This is a multi-functional handheld vacuum that's easy to print, simple to install, and powerful. Whether it's the printer chamber, the smooth rod, or the desktop, it can suck up dirt from all these places!

A 3D printer accessory for all-around printer cleaning

Blow and vacuum in one: Flexible cleaning method

Rich functions: Various tool heads for different purposes

Endless possibilities: Provides STP - file interfaces for customized nozzles as per requirements

Tools required:

• H1.5 hex key
• Adhesive

Tips for printing and usage:

1. Print the dust cup with translucent or transparent material to check the capacity and clean it in time.
2. Semi - transparent PLA is more aesthetically pleasing than semi - transparent PETG with less layer pattern reflection, but it's a bit less transparent. If you want a more transparent dust cup, refer to the Wiki page.
3. The brush has many bent ends. Clean the print bed and use glue before printing to ensure good adhesion.
4. The smooth rod cleaning head has a sacrificial layer. Cut it off before use.
5. The status indicator lights for charging and running states are as follows:
6. Twist off the dust cup lid to empty the dust.
7. If used on surfaces such as leather, when the vacuum's intake airflow is low, please lift the vacuum occasionally to ensure proper airflow. The motor relies on the passing air for cooling.
8. Although this product can be used as a car vacuum, for battery safety& filament heat resistance, it's recommended not to leave this lithium-battery model in a potentially enclosed, high-temperature environment—such as a car exposed to direct sunlight.