Cats For Everybody - Free 3D Print Model

Search models, users, collections, and posts

rdantes

Generative 3D Model>Hueforge & Lithophane

IP Report

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.04mm layer, 1 walls, 100% infill

Designer

6.5 h

1 plate

Open in Bambu Studio

Boost

Released

Description

Project: Cats For Everybody.hfp

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 200x199.64mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.68mm

    PLA Bambu Basic Black Transmission Distance: 0.1
    PLA Bambu Basic Light Gray Transmission Distance: 1.1
    PLA Bambu Basic Red Transmission Distance: 3.9
    PLA Bambu Matte Caramel Transmission Distance: 0.7
    PLA Bambu Basic Jade White Transmission Distance: 6.3
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #10 (0.52mm) swap to Light Gray
    At layer #12 (0.6mm) swap to Red
    At layer #22 (1mm) swap to Caramel
    At layer #24 (1.08mm) swap to Jade White for the rest.

cats

HUE FORGE