Articulated lamp kit 001 integrated switch
Print Profile(1)
Bill of Materials
- Vis M7 23mm x 3:
- Boulon M7 x 3:
Description
An articulated desk lamp compatible with LED kit 001
Printed in blue and white PLA without AMS
Assembly requires 3 M7 23mm screws with 3 M7 bolts
Assembly steps :
Pass the LED kit 001 cable inside the hole of the “Lamp” piece (the top one)
Attach arm 1 (the thickest) to the lamp with screw and nut
Pass the cable through arm 1 through the grooves
Attach arms 2 and 3 to arm 1
Attach the Z axis to arms 2 and 3
Disassemble the switch cover
Pass the cable into the groove of base part 1 then wrap it around the cylinder
Place the switch in the small hole of base 1
Route the cable out of base 1 through the designated hole
Close with base 2, add a dot of glue if necessary
Place double-sided tape under the lamp and position it where you want
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)