Grave of the Fireflies Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 133.33x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

   #1c1c1c PLA PolyTerra Charcoal Black  Transmission Distance: 0.3
   #7d6556 PLA BambuLab Matte Dark Green  Transmission Distance: 2
   #fec600 PLA BambuLab Basic Sunflower Yellow  Transmission Distance: 4.4
   #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
   Start with Charcoal Black
   At layer #10 (0.88mm) swap to Dark Brown
   At layer #12 (1.04mm) swap to Sunflower Yellow

Border Only Colors from here until the end.
   At layer #22 (1.84mm) swap to Jade White for the rest.