Search models, users, collections, and posts
Porco Rosso Hueforge
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
3.6 h
1 plate
Open in Bambu Studio
Boost
11
33
0
0
5
1
Released
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 140.25x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
#9d2235 PLA BambuLab Basic Maroon Red Transmission Distance: 1.6
#de4343 PLA BambuLab Matte Scarlet Red Transmission Distance: 2
#e4bdd0 PLA BambuLab Matte Sakura Pink Transmission Distance: 3
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Maroon Red
At layer #7 (0.64mm) swap to Scarlet Red
At layer #12 (1.04mm) swap to Sakura Pink
At layer #20 (1.68mm) swap to Jade White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (0)