Brother TZe tape case
Print Profile(1)
Description
Membership
Support my work & Commercial Licences
Hello everyone,
We present to you our new box.
A reinvention of our famous box, this time adapted for Brother TZ tapes.
For a long time we had a problem with where to put our printer tapes, so we decided to make our own.
The box has 17 compartments for tapes.
Since we have different tapes, and they are not all the same width, we made them as follows:
3pcs for 24mm tapes
5pcs for 18mm tapes
9pcs for 6,19 and 12mm tapes (they are the same width)
Simple and easy print .
All parts are completely printed with PLA, only the gasket needs to be printed with TPU.
Since this box also has a handle, this time we also made a pin for the handle so you don't need a standard screw.
The box is completely printed, you don't need any screws. All you need to do is print the first profile for the box, and download the model that replaces the screws from the link below.
https://makerworld.com/en/models/978052-utility-xl-koffer-bolzen#profileId-951221
Also, on the inside, each compartment is marked with a number indicating which strips correspond, as you can see in the picture below.
I hope you find this box as useful as we do, and that you enjoy printing it.
Boost Me (for free)
If you enjoy this and our other models, please press boost and support us so that we can create new, interesting, and useful things
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (10)