Heartpulse Earrings

A pair of earrings representing heart pulses.

Bill of Materials

You will need:

• Earring hooks
• Eye pins for earrings (0.6 mm diameter, 16 mm length)

A very small amount of glue can be useful to ensure the eye pins stay firmly in place.

Instructions

Each earring has a small hole at the top. Simply insert an eye pin through the hole, then attach the hook to the eye pin.
If needed, you can apply a tiny drop of glue to the eye pin before inserting it to secure it more effectively.

Printing recommandations

• Use a 0.2 mm or 0.4 mm nozzle with the Arachne wall generator enabled in your slicer for the best results.
• Print on a smooth build plate (smooth PEI or similar).
• If you experience adhesion issues, make sure your build plate is thoroughly cleaned.

Design

• Font Awesome icons were used as the basis for the heart pulse.