FAB500 with UMPK kit, glide bomb, multi-color pre-plated, no AMS required

Russia's FAB-500 with UMPK model, often referred to as a loitering munition

The components have been separated to reduce supports for printing

It is generally divided into flight components and the missile body; the flight components include the fuselage, front wings, rear wings, and clamps

Although there are relatively many components, assembly is not complicated; by combining with the 3D model I created, assembly can be completed accurately, please perform a test assembly first to prevent incorrect part placement

The front wings can be folded for storage, the clamps are detachable, and the rear clamp precisely hides the seam of the missile body

The size ratio of the flight components has been increased; otherwise, at actual proportions, the strength would be completely insufficient.

Total length 30cm, wingspan also 30cm, three plates, reasonably distributed, please reduce print speed when printing the wings to increase the success rate

Personal modeling, separation, and testing took a lot of effort and thought; if you like it, please give it a like

Unauthorized commercial use is prohibited