Radio-shaped MP4

An MP4 player shaped like a radio
Its purpose is unclear, but those who need it will understand

The exterior is a 3D printed radio-shaped shell with a retractable antenna, speaker, and buttons.
The back can actually be flipped open, and inside is a Lenovo B611 model MP4 player purchased from an online store. It supports music, video, e-books, alarms, a voice recorder, and a gallery, runs on an Android system, supports TF card expansion, has a Type-C charging port, and cost 127 yuan on JD.com.
It supports all video formats, using the excellent KMPlayer on the Android system.

Other accessories to purchase:
1. Five M3 Phillips screws from Pinduoduo (standard model, buy from whoever is cheapest)
2. A retractable radio antenna from Pinduoduo, 7 yuan.

Shell details:
1. The antenna has a buckle, so it won't shake.
2. The back flip-cover opening is only visible after extending the antenna.
3. The TF card is not exposed and requires unscrewing to access.
4. The charging port is exposed for convenient charging.

This label was printed using a label printer. It makes it look more authentic.

Assembly method:

1. Remove the joint from the antenna after it arrives.

2. After printing the radio shell, place the player inside, with the player facing the opposite direction of the printed radio.

3. There is a small piece in the print that acts as a button; pressing it will activate the button on the player inside.

4. Screw it on, and you're done.