Syma G36c rear stock AR stock core high-mount adapter
Print Profile(1)
Description
There are two adapters inside; one is positioned higher, and the other's axis is basically level with the inner barrel. Unscrew the four Phillips screws from the two front parts of the original Syma G36c folding stock and store the springs. No tapping is needed; just screw it directly into the holes I left on the model. I used a nylon stock core secured with 50mm M5 screws, nuts, and metal washers. Before installing the stock core, the nuts must be pre-installed in the model. If your AR stock core has different specifications, you may need to find your own way to secure it.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)