Water tank cap FAWO compatible (hole optional)
Print Profile(1)
Bill of Materials
Description
The hole for a cord (to prevent falling out) is optional!
A tab on my caravan's water tank cap broke off:
Instead of buying a new one, I preferred to design and print the part.
Caution: Not every lock is compatible. I was able to design and test it for the following 2 types of locks:
 | Use the long insert from the print file.
Tip for inserting the lock: 1 slot is angled at the bottom… |  |
 | Use the short insert from the print file. | 
|
The print file contains 2 different covers and 2 different inserts.
One cover has a hole for a cord, and one does not.
Each insert can be used in any cover.
One insert is compatible with each of the two locks shown.
The insert is held by 4 10mm M3 grub screws.
Delete incompatible parts before printing.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (4)