MiMumin

This is my first 3D model, so it’s not fully polished yet — I’m sharing it as a beginner-friendly project that anyone can tweak or improve.

The model is a keychain inspired by the character Little My from the Moomins. I designed it for multicolor printing using an AMS with 5 colors, but it can also be printed in one color and painted afterwards.

There are no dedicated connectors between the parts, so they will need to be glued together. More advanced users can edit the model, add their own joints, or adjust the geometry.

The text on the dress can be changed or removed completely.

The project is split into three plates (head, boots, dress) due to frequent filament changes during printing.

The model was printed on a Bambu Lab P1S using Bambu Lab and Sunlu filaments, with a 0.4 mm nozzle, at 0.16 mm High Quality settings. I also used a modifier around the keychain loop to increase infill in that area for extra strength.

I hope someone finds it useful — feel free to share remixes or improvements!

Filaments i use :

PLA Bambu Lab Basic Pumpkin Orange
PLA Bambu Lab Basic Jade White
PLA Bambu Lab Matte Charcoal
SUNLU PLA 1.75mm 1kg Beige / Beżowy
SUNLU PLA Classic (HS Matte) 1.75mm 1kg Cherry Red