Print Profile(1)
Description
Fix iPhone 17 Pro wobble instantly with this ultra-fast printable camera protector — no glue, clean design, perfect fit.
✔ Stops iPhone wobble on flat surfaces
✔ Protects camera lenses
✔ Prints in 7–14 minutes
✔ No glue required
✔ Ultra minimal design
Important:
This model is strictly for the 17 PRO (not MAX)!
iPhone 17 Pro MAX model is here: https://makerworld.com/en/models/2004183-sleeky-iphone-17-pro-max-anti-wobbling-cam-protect#profileId-2158229
Features:
- Holds on its own, no glueing involved
- iPhone stops wobbling when put on a table screen side up - the plate will distribute the weight on the whole width of the device
- The camera is much more protected when the phone is placed on its back on any surface. Regularly, one of the cameras is in the main risk zone. The plate provides additional protection while distributing the weight and a pressure zone across the width of the device
- Easy to put in a pocket in comparison to other models - the plate is beautifully cut, allowing easy slip into your pocket.
- Wonderful addition to the style of your phone, making it really stand out. Experiment with as many colours as you wish!
- Close to zero cost!
- Just a 14-minute (!) print on the best quality settings! (referenced for A1Mini, 0.4 nozzle). Just 7 minutes on the 0.2 layer standard print quality
Recommendations:
- Print using the Smooth PEI Plate or with the Bambu Cool Plate SuperTrack (or anything similar) - this will give Sleeky a desired matte finish with almost any PLA.
- Apply carefully. PLA has exactly enough allowance to fit into the gaps and hold onto the cameras' fending structures. Just be gentle, and it will fit perfectly.
Boost Me (for free)
Do not forget to Boost, Like and Subscribe, not to miss my new models! All support, likes, and comments are greatly appreciated and very helpful on my way to creating new great models for you!
This model is my variation of a back plate for the iPhone 17 Pro. I tried other models, but they all had their issues. One of the most annoying things is that the plate only holds on the camera's structures and fences, and so the right part of the plate is not really connected to anything. I can't count the number of times when I was putting my phone in my pocket, but the plate did stick against the jeans material and with the pressure, just slipped away from the phone.
I made it much smaller as the main working part is around the lower camera, and the rest of the model serves the beauty of the device-plate combination. The cutouts made the way the plate is not push against the pocket material and slips into the pocket without any issues.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (28)